LED clock function destription
This is an wooden LED clock made of MDF+ bamboo patch + plastic parts. This wooden LED clock is not only clocks, but also is a part of our life. Integrating technology into life is the embodiment of real value. Our company is committed to developing more products to close to life, to make the life more colorful.
The details specification is as below:
1. 4 digit LED calendar clock for 100 years, time, date, temperature
select the display mode by pressing "UP"button
dP-1: the clock will cycle between the time (10s), the date (2s) and the temperature (2s)
dP-2: the clock will stay on the display selected. The default display is time.
dP-3: the clock will show only the time.
2. 3sets of alarm with 60 seconds sound
3. 12/24 hr format
4. Energy saving by sound control: When the sound control is on, the clock will go into stand by after 30 seconds, but will continute to work. The display can be reactivated by sound.
5. Power-down protection
6. Temperature :0-50℃℃， switch ℃ and ℉ by pressing "DOWN" button 2 seconds,
7. Power: AC 110-240V/DC5.0V, 4*AAA batteries. (backup battery CIR2032 3.0V)
How to use:
Install the battery with a BI sound, then the clock shows 12:00 after cycle through the display: 0000-9999-DP. Press the "SET" button to cycle through the display options in the following order: "Time-date-alarm1-alarm2-alarm3-temperature"
1. Setting the time
In time display, press and hold the "SET" button for 2 seconds when the display shows the time.
Press "UP" to change the time format between "12hr" (1) and "24hr" (2)
Press the "SET" button to set the hour value
Press the "UP" or "DOWN" vaule to adjust the value.
Press the "SET" button again to set the minute vaule.
Press the "UP" or "DOWN" vaule to adjust the value.
2. Setting the date:
In time display, press and hold the "SET" button for 2 seconds when year flashes.
Press the "UP" or "DOWN" value to change the year.
Press the "SET" button again to set the month value.
Press the "UP" or "DOWN" value to adjust the value.
Press the "SET" button again to set the minute value.
Press the "UP" or "DOWN" value to adjust the value.
3. Setting the alarm:
In alarm display mode A1-A2-A3, Press and hold the "SET" button for 2 seconds when the display shows the time.
Press the "SET" button to set the hour value (7).
Press the "UP" or "DOWN" value to adjust the value.
Press the "SET" button again to set the minutes value (8)
Press the "UP" or "DOWN" value to adjust the value.
The screen will show "ON:A1" when the alarm is activated.
